Product Details:
|
|
Place of Origin: | Guangdong, China |
---|---|
Brand Name: | Aeropak |
Certification: | REACH, TUV, ISO |
Model Number: | APK-6601 |
Payment & Shipping Terms:
|
|
Minimum Order Quantity: | 500 cartons |
Price: | Negotiable |
Packaging Details: | 12pcs/ctn |
Delivery Time: | within 30 days |
Payment Terms: | by T/T or L/C at sight |
Supply Ability: | 1000000pcs/month |
Detail Information |
|||
Brand: | AEROPAK | Product Name: | Graffiti Paint |
---|---|---|---|
Filled ML: | 400ml | Color: | Grey |
Item No.: | APK-6601-8 | State: | Liquid Coating |
High Light: | graffiti art spray can,montana spray paint |
Product Description
Grey Color Graffiti Wall Painting Easy Construction Operation Drying Quickly
Product Feature:
A quick-drying thermoplastic acrylic aerosol paint
Flexible and easy construction operationSpraying atomization is good, the discharge rate is high
The paint is drying quickly, the film fullness is high
Colorful, excellent decorative effect
Have excellent protection effect
Scope of Application:
Widely used in a variety of metal, surface treatment of wood, glass, ABS plastic and other substrate coating
Brand | AEROPAK |
Product name | graffiti paint |
Filled ML | 400ml |
Color | grey |
Item No. | APK-6601-8 |
State | Liquid Coating |
Precautions:
1. Content under pressure. Keep away from heat, flame, spark and other source of ignition.
2. Do not spray on objects with direct contact of food.
3. Spray in well-ventilated place. A better coating effect will be gained if operate in a cool, dry and dustless environment.
4. Avoid applying the lacquer on a rainy or freezing day.
5. Do not clash, puncture, or incinerate the can, even after use.
6. Store in a cool, dry place (45℃); Avoid direct sunlight.
7. Keep out of the reach of children.
Package:
Item No.: |
ID-217 |
Can Size: |
∮65mmx 158mm H |
Package: |
400ml x 12pcs/ctn |
Carton Size: |
275x205x205 mm |
20ftContainer Loading |
2500 cartons |
For best results, clean surface of grease, wax, rust and dust. Scuff or lightly sand all glossy surfaces removing any unwanted bumps or flaking paint, then dust off. Prime raw timber or metal with Aeropak primer and allow to fully dry.
IMPORTANT : Shake the can vigorously for one minute before use. Holding the can 30cm from prepared surface, begin by applying one light mist coat, spraying in a continuous motion across the surface working left to right. Pause, allowing the mist coat to set for 30 to 60 seconds, then apply additional coats working at 90° to the first coat. If a thicker finish is required, allow at least one hour between extra coats. When painting over existing paint always check compatibility.
Clean any over spray with mineral turps or general-purpose thinners. For better long term storage, turn can upside down and spray until no paint is coming out.
Spray unneeded product on to newspaper dispose to waste.
Empty can is recyclable.
PROPELLANT: HYDROCARBON
Keep out of reach of children
If swallowed seek medical advice immediately.
Warning - intentional misuse by deliberately inhaling contents
can be harmful or even fatal.
Enter Your Message